High-quality MOLYKOTE PG-75 grease for lubrication of plastic-to-plastic and plastic-to-metal combinations. Fully compatible with plastics and elastomers, with a wide temperature range suitable for use in bicycles and e-bikes.
Shop
Repuestos y componentes para Bosch eBike
-17% Sold out Hot
Brose Belt Maintenance Kit – S Mag Motors / Specialized Gen2
Original price was: €120.00.€99.90Current price is: €99.90.Original Brose Motor Belt Maintenance Kit. Compatible with all Brose magnesium motors (also on Specialized Turbo Levo Gen2, and 3).
-22% Hot
Bearings for Brose / Specialized Turbo Motors – Complete Kit
Original price was: €179.00.€139.00Current price is: €139.00.Complete kit of bearings and one-way clutches for Brose Alu, Brose Mag and Specialized Turbo motors equipped with a Brose drive unit. Includes part numbers PLB20121 to PLB20127, metal PLB20126 and PLB20127 one-way clutches, and an additional seal to improve protection against water and dirt.
-37% Sold out Hot
Brose Belt Maintenance Kit – Aluminium Motors / Specialized Gen1
Original price was: €109.00.€69.00Current price is: €69.00.The Brose T and S Motor Belt Kit allows you to change the belt of your Brose Alu motor and make it as good as new. This belt is the revised version – carbon-reinforced belt, more robust than the original.
-19% Hot
Torque Wrench 0.2 Nm for Brose Motors
Original price was: €32.00.€25.99Current price is: €25.99.Torque wrench to tighten the belt tensioner bolt on Brose motors to 0.2 nM.
-14%
Brose Sprag Bearing Grease – 30 ml
Original price was: €7.00.€5.99Current price is: €5.99.Special grease compatible with ebike sprag bearings. Used in Brose ebike motors. It is applied sparingly on the bearing and on the track.
-17%
Molykote PG-75 – Grease for Plastic Gears (30 ml)
Original price was: €12.00.€9.99Current price is: €9.99.
Hot
Bosch Gen 2 Bearing Kit
Price range: €4.50 through €99.90Bearings for the repair of Bosch Generation 2 motors (Active Line, Performance Line, Performance Line CX).
System 2: Bosch BDU2XXX, BDU250P, BDU250C, BDU255C
The bearings have various manufacturers. The number PLBXXXXXX is for reference.
Select options
This product has multiple variants. The options may be chosen on the product page
Crank Seal Upgrade for Brose Motors
€6.00An improvement for all Brose motors, extending bearing life – external X-Ring seals to protect the motor from water ingress.
-7%
Bosch Gen 4 Maintenance Kit BDU4XX, BDU37YYY
Original price was: €31.99.€29.90Current price is: €29.90.The official Bosch kit for the maintenance of Bosch Gen 4 motors. Includes shaft bearing protection rings and tool to remove old seals.
Adaptador Shimano SM-MA-F203P/PM para rotor de 203 mm
€11.90Adaptador Shimano SM-MA-F203P/PM para rotor de 203 mm
-24%
Sprag Clutch Bearing for the Pulley of Brose Alu S / Mag S Motors
Original price was: €45.90.€34.90Current price is: €34.90.Оne-way clutch for the pulley or large transmission gear of Brose Alu S and Brose Mag S motors. It replaces the internal pulley clutch and offers improved durability compared with versions featuring a plastic cage. Dimensions: 35 × 43 × 11 mm.
-6% Sold out Hot
Bosch Gen 4 Bearing Kit
Original price was: €170.00.€159.00Current price is: €159.00.Bearings for the repair of Bosch Generation 4 motors (Performance Line CX and SmartSystem with large chuck:
SmartSystem: Bosch BDU3741, BDU3781
System 2: Bosch BDU490P, BDU450CX
The bearings have several manufacturers. The number PLBXXXX is for reference.
-24%
Sprag Clutch Bearing for Brose Alu S / Mag S Motor Crankshaft
Original price was: €45.90.€34.90Current price is: €34.90.One-way clutch bearing for the crankshaft of Brose Alu S and Brose Mag S motors. Also known as a sprag bearing, it provides the crankshaft freewheel function. Dimensions: 40 × 48 × 11 mm. Requires a grease specifically designed for one-way clutches.
-17% Sold out
Enduro Bearings 3801 LLU MAX – Rodamiento suspensión 12x21x8 (Doble fila, Inox)
Original price was: €12.00.€10.00Current price is: €10.00.Rodamiento de suspensión Enduro Bearings 3801 LLU MAX 12x21x8 mm. Diseño de doble fila angular contact, sellado LLU MAX. Acero inoxidable.
-20% Sold out
XLC – Lockring Tool TO-E04 for Bosch Gen 3 and Gen 4 und Brose
Original price was: €20.00.€16.00Current price is: €16.00.XLC – Lockring Tool TO-E04
For Bosch Gen 3 and Gen 4
The XLC Lockring Tool TO-E04 is suitable for the mounting and dismounting of lockrings. Compatible with specific Bosch Gen 3 and Gen 4 models.
-25% Sold out
WERA – TORX PLUS® Security 25 IPR Bit 1/4″ for Bosch Gen 4 retaining plates
Original price was: €12.00.€9.00Current price is: €9.00.WERA – TORX PLUS® Security 25 IPR Bit 1/4″
For Bosch Gen 4 (BDU4XX) retaining plates
Original WERA TORX PLUS® Security 25 IPR bit, required for the safe assembly and disassembly of retaining plates on Bosch Gen 4 (BDU4XX) e-bike motors. Perfect fit, optimal torque transmission and reduced risk of damaging the screws.
-19% Sold out
Bosch Logo Cover – Performance Line CX Gen 4 (BDU4XX)
Original price was: €8.00.€6.50Current price is: €6.50.
Sold out
Bearing Sleeve Inside Pulley – Brose C, T, TF, S and S Mag Motors
€60.00Brose Engine Specific Replacement Part – Precision and Durability
The pulley inner center race is a replacement part designed specifically for Brose C, T, TF, S and S-Mag motors. This race serves as a working surface for the PLB20126 bearing, allowing for smooth, quiet and efficient operation of your e-bike’s drive system.
Manufactured with a rubber outer body and metal inner race, it provides a precise fit and high wear resistance.
Sold out
Bosch Gen 2 Mantenimiento y Reparación
Price range: €60.00 through €295.00Important notice:
This repair service is currently available only to customers located in Spain and Portugal. At this time, we are not able to accept motors sent from other countries. We hope to resume our repair service for the rest of Europe soon.
We offer the following services:
Inspection and quotation
With this service, we open the motor, assess its condition and send you a quotation for the repairs required. If you approve the repair, the inspection fee is deducted from the final cost.
Complete maintenance
We replace the official motor service kit, the bearing on the left-hand side and any other bearings or components that need replacing.
All services include:
✅ Cleaning and condition assessment
✅ Labour
✅ Lubrication with the official grease
Shipping included: Send us a message on WhatsApp and we will arrange the collection and return of the motor.
We also work with bicycle shops.
Not included:
Removal and installation of the motor on the bicycle.
Select options
This product has multiple variants. The options may be chosen on the product page
-17% Sold out
DISCO AVID G2 CLEANSWEEP 180 mm
Original price was: €30.00.€25.00Current price is: €25.00.Disco de freno Avid G2 Clean Sweep.
- para todos los frenos a disco hidraulicos: Juicy y Code.
- 6 agujeros.
- Color de base: Plata
- Filtrar: 6T
- Filtrar: 180
- Marca: Avid
- Available for preorder: Disponible para prepedido
- Peso (gr): 210
Sold out
Cassette Shimano DEORE CS-M5100 11 velocidades – 11-42T
€55.00Precisión y fiabilidad para transmisiones de 11 velocidades
El Shimano DEORE CS-M5100 es un cassette de 11 velocidades diseñado para ciclistas de montaña que exigen rendimiento, durabilidad y cambios suaves en cualquier terreno. Gracias a la tecnología HYPERGLIDE, garantiza transiciones de marcha rápidas y precisas, incluso bajo carga.
Este modelo de 11-42 dientes está optimizado para transmisiones 2×11 velocidades, proporcionando una relación más cerrada ideal para quienes buscan eficiencia en la cadencia y versatilidad en rutas mixtas.
-34% Sold out
Cadena Shimano CN-LG500 Linkglide de 10/11 velocidades con Quick-Link, 120 eslabones
Original price was: €29.00.€19.00Current price is: €19.00.Cadena Shimano CN-LG500 Linkglide de 10/11 velocidades con Quick-Link, 120 eslabones
Bosch eBike
Componentes Electricos
Motores
Accesorios
Rodamientos y Piezas internas
Accessories