Brose eBike

Bearings for Brose / Specialized Turbo Motors – Complete Kit

Complete kit of bearings and one-way clutches for Brose Alu, Brose Mag and Specialized Turbo motors equipped with a Brose drive unit. Includes part numbers PLB20121 to PLB20127, metal PLB20126 and PLB20127 one-way clutches, and an additional seal to improve protection against water and dirt.

-35% Hot

Brose Belt Maintenance Kit – Aluminium Motors / Specialized Gen1

The Brose T and S Motor Belt Kit allows you to change the belt of your Brose Alu motor and make it as good as new. This belt is the revised version – carbon-reinforced belt, more robust than the original.

-17% Hot

Torque Wrench 0.2 Nm for Brose Motors

Torque wrench to tighten the belt tensioner bolt on Brose motors to 0.2 nM.

-14%

Molykote PG-75 – Grease for Plastic Gears (30 ml)

Molykote

High-quality MOLYKOTE PG-75 grease for lubrication of plastic-to-plastic and plastic-to-metal combinations. Fully compatible with plastics and elastomers, with a wide temperature range suitable for use in bicycles and e-bikes.

Technical Vaseline for Brose Motor Belts – 30 ml

BiciFix, Brose

$6.00

-11%

Brose Sprag Bearing Grease – 30 ml

Special grease compatible with ebike sprag bearings. Used in Brose ebike motors. It is applied sparingly on the bearing and on the track.

Crank Seal Upgrade for Brose Motors

$7.00

An improvement for all Brose motors, extending bearing life – external X-Ring seals to protect the motor from water ingress.

-23%

Sprag Clutch Bearing for the Pulley of Brose Alu S / Mag S Motors

BiciFix, Brose

Оne-way clutch for the pulley or large transmission gear of Brose Alu S and Brose Mag S motors. It replaces the internal pulley clutch and offers improved durability compared with versions featuring a plastic cage. Dimensions: 35 × 43 × 11 mm.

Brose Belt Tensioner – For Alu and Mag Motors (G63624)

$73.00

-23%

Sprag Clutch Bearing for Brose Alu S / Mag S Motor Crankshaft

One-way clutch bearing for the crankshaft of Brose Alu S and Brose Mag S motors. Also known as a sprag bearing, it provides the crankshaft freewheel function. Dimensions: 40 × 48 × 11 mm. Requires a grease specifically designed for one-way clutches.

Sold out

Bearing Sleeve Inside Pulley – Brose C, T, TF, S and S Mag Motors

$73.00

Brose Engine Specific Replacement Part – Precision and Durability

The pulley inner center race is a replacement part designed specifically for Brose C, T, TF, S and S-Mag motors. This race serves as a working surface for the PLB20126 bearing, allowing for smooth, quiet and efficient operation of your e-bike’s drive system.

Manufactured with a rubber outer body and metal inner race, it provides a precise fit and high wear resistance.

-19% Sold out

XLC – Lockring Tool TO-E04 for Bosch Gen 3 and Gen 4 und Brose

XLC – Lockring Tool TO-E04

For Bosch Gen 3 and Gen 4

The XLC Lockring Tool TO-E04 is suitable for the mounting and dismounting of lockrings. Compatible with specific Bosch Gen 3 and Gen 4 models.

-13%

Left Crankshaft Motor Bearing for Brose Motors

-44%

Right Crankshaft Bearing for Brose Motors

Sold out

Complete Pulley – Brose Motor

$157.00

-16%

Brose e-Bike Display Allround

-19%

Needle Roller Bearing and Seal for Brose Motors

-22%

Large Bearing for the Pulley Brose Motor (Alu / Mag)

-18%

Laird Tputty™ 607 – Thermally Conductive Putty 15 g (Professional Use)

Masilla térmica conductiva monocomponente dispensable (gap filler líquido) para aplicaciones que requieren transferencia térmica eficiente. Utilizada en reparación de motores eBike. Formato 15 gr reenvasado por BiciFix.

-19%

CYCLUS TOOLS – Crank Puller for Square Cranks

CYCLUS TOOLS crank puller for square cranks, a practical tool for removing crank arms on bicycles with square axles.

-33%

Brose Center Shaft Bearing

IceToolz PAP21 – Extractor de Bielas Cotterless (Compatible con Shimano Octalink e ISIS Drive)